40% Complete

Get finance quotes - start here
Select File (max 10Mb) Got a quote PDF from DFH? Add it here to speed up the process (optional)

Credit provided by independent organisations - applications are subject to their eligibility and suitability criteria and normal credit approval processes. You should ask them to view their current terms and conditions for asset finance and consider this information before making any decision about their products. Fees, charges, terms, conditions and lending criteria may apply. DFH will not share the above information except with the finance partners (required to send the quotes). DFH supplies millions of dollars of drone equipment to Australians every year, is an official DJI dealer, and maintains the largest drone services platform in Australia since 2013.

By clicking the above you agree to the terms & conditions. Still have questions? Feel free to ask us via [email protected] or 1300 029 829.

DJI Zenmuse P1

Short video
Short video
Long video
Long video


DJI Authorized Dealer

DJI Zenmuse P1

3 currently viewing
Page updated by Leo W. on April 20, 2024
Current Sale Offer: Get $1,346 off
Jump to the discounted bundle below
quote First there was the Phantom 4 RTK (20 MP 'X4S' camera), now there is the P1 - a full-frame sensor, 45MP camera designed to mount to an M300, for outstanding photogrammetry (making maps and models from photos). Fly higher and capture larger areas in shorter time frames. It comes standard with the 35mm lens, and with 24mm and 50mm lenses also available as add-ons. Some customers are putting their older X7 lenses on - we are still collecting feedback on the results. quote
Leo – DFH Software Engineer

Sale is currently on, see pricing in the bundles below
5 good reasons to order with DFH
The Zenmuse P1 integrates a full-frame sensor with interchangeable fixed-focus lenses on a 3-axis stabilised gimbal. This payload is specifically designed for photogrammetry flight missions and takes efficiency/accuracy to a whole new level.

Accuracy without GPS: 3 cm horizontally / 5 cm vertically
High Efficiency: 3 km surface area covered in a single flight with a photo taken every 0.7s during flight.
Full-Frame Sensor: 45 MP low-noise Sensor, 4.4 um Pixel Size.
Gimbal: 3-axis stabilised gimbal with smart oblique capture
Global Mechanical Shutter: Maximum shutter speed of 1/2000 seconds.
Timesync 2.0: Synchronisation at the microsecond level across modules.
Versatility: Created 2D, 3D and detailed models.
Lens compatibility: Supports 24/35/50mm lenses with DJI DL Mounts.

Work Smart, Work Fast

Smart Oblique Capture
Cover 7.5km in a single workday with the P1. Smart Oblique Capture elevates the efficiency of your mission where the gimbal will automatically rotate to take photos at the different angles needed. Only photos essential to the reconstruction will be taken at the edge of the flight area, meaning your post processing efficiency is increased 20% up to 50%.

Fieldwork Report
Verify the data quality immediately post-flight by checking the position data and number of images acquired, as well as RTK status and positioning accuracy.

Smart Data Management
All your mission data management is streamlined.
— Mission results files are automatically associated with the mission name and mission time.
— A centralised storage location for photos, GNSS data and TimeStamps MRK files.
— The image metadata contains the cameras intrinsic and extrinsic parameter of the status of RTK.

A Mission Mode for Any Scenario

2D Orthomosaic Mission: Generate orthomosaics without GCPs using the P1, perfect for medium to large-area operations. 3D Oblique Mission: Effortlessly acquire oblique images from multiple angles that meet the 3D modelling requirements across industries such as urban planning and centimeter-level accurate cadastral surveys to serve 3D reality models and smart city planning.
Detailed Modelling Mission: Acquire ultra-high resolution image data of vertical or slanted surfaces from a safe distance that faithfully recreates subtle textures, structures and features for detailed reconstructions, geological surveys, heritage site conservation, hydraulic engineering and more.
Real-time Mapping Mission: Gather geographic information of large areas in real-time using DJI Terra so that teams can make crucial decisions quickly on site.

P1 parameter setting recommendations and FAQ (pdf)


General

  • Product Name

  • ZENMUSE P1
  • Dimensions

  • 198×166×129 mm
  • Weight

  • Approx. 800 g
  • Power

  • 20W
  • IP Rating

  • IP4X
  • Supported Aircraft

  • Matrice 300 RTK
  • Operating Temperature Range

  • -20° to 50° C (-4° to 122° F)
  • Storage Temperature Range

  • -20° to 60° C (-4° to 140° F)
  • Absolute Accuracy

  • Horizontal: 3 cm, Vertical: 5 cm *
    * Using Mapping Mission at a GSD of 3 cm and flight speed of 15 m/s, with an 75% front overlap rate and a 55% side overlap rate.

Camera

  • Sensor

  • Sensor size (Still): 35.9×24 mm (Full frame)
    Sensor size (Max video recording area): 34×19 mm
    Effective Pixels: 45MP
    Pixel size: 4.4 μm
  • Supported Lenses

  • DJI DL 24mm F2.8 LS ASPH(ENTERPRISE) (with lens hood and balancing ring/filter), FOV 84°
    DJI DL 35mm F2.8 LS ASPH(ENTERPRISE) (with lens hood and balancing ring/filter), FOV 63.5°
    DJI DL 50mm F2.8 LS ASPH(ENTERPRISE) (with lens hood and balancing ring/filter), FOV 46.8°
  • Supported SD Cards

  • SD: UHS-I rating or above; Max capacity: 512 GB
  • Storage Files

  • Photo / GNSS Raw Observation Data/ Image Log File
  • Photo Size

  • 3:2 (8192×5460)
  • Operation Modes

  • Photo, Video, Playback
  • Minimum photo interval

  • 0.7 s
  • Shutter Speed

  • Mechanical Shutter Speed: 1/2000*-1 s
    Electronic Shutter Speed: 1/8000-1 s
    *Aperature value no larger than f/5.6
  • Aperture Range

  • f/2.8-f/16
  • ISO Range

  • Photo: 100-25600
    Video: 100-25600

Video

  • Video Format

  • MP4
  • Video Resolution

  • 16:9 (1920×1080)
    16:9 (3840×2160)*
    *Only 35mm lens supported
  • Frame Rate

  • 60fps

Gimbal

  • Stabilized System

  • 3-axis (tilt, roll, pan)
  • Angular Vibration Range

  • ±0.01°
  • Mount

  • Detachable DJI SKYPORT
  • Mechanical Range

  • Tilt: -125° to +40°; Roll: -55° to +55°; Pan: ±320°
P1 parameter setting recommendations and FAQ (pdf)

Basic parameters
The P1 takes photos with a resolution of 8192 * 5460, or approximately 45 megapixels.
Photos: JPEG, JPEG+DNG;
Videos: MP4.
0.7 second.
1/2000s to 1s.
4.4μm.
The P1 supports 24mm, 35mm and 50mm lenses with industry-specific DL mounts. Only use lenses engraved with the "DJI Enterprise" logo to produce survey-grade accurate results.
Currently the P1 supports only three industry-specific lenses. The lenses of the P1 are optimized for surveying and mapping scenarios, including optical parameter writing, lens performance recording, and reminders. Lenses with other DL mounts can take photos and videos manually when installed on the the Zenmuse P1 camera but cannot support surveying and mapping.
Suport M300 RTK, and currently can be installed only on the single downward gimbal of M300 RTK.
In photos taken by the P1, the exit pupil position at the center of the camera lens is recorded.
Zooming is not currently supported.First Waypoint Autofocus and Calibrated Infinity Focus can be used when in Mission Flight. Manual focus is required in Manual Flight.
The Low-noise and high-sensitivity mode of the P1 can improve camera sensitivity (ISO) while reducing noise levels, which expands the range of operatable scenarios for P1.
Output the exposure time interval in microseconds;
Time synchronization for the camera, the gimbal, the flight control system, and RTK;
Brand-new position and orientation compensation function which writes precise exit pupil positions of the camera into the photos based on the positions and orientations of the drone and the gimbal.
Functional features
This feature allows photos to be taken at multiple angles during a flight by way of payload control. All the ortho- and oblique photos necessary for 3D reconstruction can be acquired in a single flight path. Only photos essential to reconstruction will be taken at the edge of the flight area, minimizing the number of images taken and significantly increasing post-processing efficiency. Unique oblique capture strategies are applied to each flight path in different flight areas to ensure complete data capture in all the target areas. Flight speeds will vary in each flight segment as the camera rotates to capture oblique and ortho-photos in the most efficient manner possible, as determined by the algorithm. This feature is currently only available using the M300 RTK with the P1. To use the function, enable it in Mapping under Mission Flight settings in the DJI Pilot app.
The tilt angle range is from -45° to -90°.
Smart Oblique Capture lets users capture sufficient data for the selected measurement area. Photos will be taken from five different angles to cover the entirety of the area, including the edges.
As the camera’s shooting angle can be affected by the aircraft’s attitude during turns, buffer zones are added in the algorithm to account for this. No photos are taken at turning points to ensure that the P1 captures images at an accurate tilt angle.
When Task Resume is enabled in a Smart Oblique Capture mission, photos will be taken from all 5 directions at the point where the mission was last paused. Once the aircraft reaches the next waypoint, opblique photos will be taken according to the settings of that waypoint.
Each flight path section comes with a different oblique capture sequence, which means the time spent completing each sequence, and the speed at which each section is completed can vary, assuming a consistent overlap rate. The aircraft will operate at maximum efficiency in the Smart Oblique Capture mode.
In Smart Oblique Capture, only photos essential to reconstruction will be taken at the edge of the flight area. The shooting sequence executed depends on the size of the measurement area demarcated by the user, the flight altitude, and the camera’s tilt angle.
24mm lens: GSD=H/55;
35mm lens: GSD=H/80;
50mm lens: GSD=H/114;
Ground Sampling Distance GSD is measured in centimeters (cm)/pixel; target distance H is measured in meters (m).
The P1 can be used in multiple surveying and mapping scenarios including 2D orthomosaic, 3D oblique, detailed modeling, and real-time mapping.
After a flight mission is completed, a field work report is generated for pilots to quickly confirm the quality of field data on site. The information provided includes the location of each photo, the number of photos, RTK positioning status, and location accuracy.* *Follow-up support
The DJI P1 is connected to the payload health management system in DJI Pilot to record the service time of devices, historical abnormal status, usage count of the shutter, and swing count of the gimbal. Corresponding suggestions on abnormalities and maintenance are then provided to ensure the best performance for each task.* *Follow-up support
Yes. The task folder stores photos, original GNSS observations, and TimeStamps.MRK files, which are used for PPK post-processing calculations.
Currently, only DJI Pilot is supported.
The P1 supports the following operating modes: aerial photography (including Smart Oblique Capture), oblique photography, corridor mapping flight, waypoint flight, and manual operation.
The terrain-following flight path function is available in Mapping mode, but not in Oblique Photogrammetry, Corridor Mapping Flight, or Smart Oblique Capture modes.
No.


Trusted suppliers to (see more):


Featured in:


Official warranties only:
100% brand new factory-sealed official manufacturer’s warranty items.
DJI Authorized Dealer DJI Agriculture Authorized Dealer Parrot SenseFly Autel Chasing

More about the DFH shop

All bundles are customisable. Just ask! [email protected] or 1300 029 829
DJI Zenmuse P1   
$9,990 $8,990 $1,000 off
1 x DJI Care Enterprise Basic. Two replacements are offered if you crash. See DJI’s official webpage for full details   
Included
1 x 6-months subscription to DJI Terra - Electricity Online Version   
Included
1 x $300 bonus credit for receiving customer job inquiries via DFH subscription   
$300 Free
1 x 4 in 1 SD/TF/CF/MS Card Reader, 5Gbps, USB3 & USB-C (item images)   
$24.9 Free
1 x Pro Baseball Cap (item images)   
$21.9 Free
Frequently Bought Together
DJI Care Enterprise Plus. Unlimited replacements are offered if you crash. See DJI’s official webpage for full details   
$935 $850 $85 off
Add to cart
24mm F2.8 Lense   
$2,199 $1,950 $249 off
Add to cart
50mm F2.8 Lense   
$2,099 $1,818 $281 off
Add to cart
We just delivered another DJI Agras T40 to a satisfied customer in Hampton NSW 2790
1 day ago
We just delivered another DJI Agras T40 to a satisfied customer in Streatham VIC 3351
1 day ago
We just delivered another DJI Agras T40 to a satisfied customer in Wondunna QLD 4655
2 days ago
We just delivered another DJI Matrice 300 to a satisfied customer in Figtree NSW 2525
3 days ago
We just delivered another DJI Agras T40 to a satisfied customer in Springlands Qld, 4804
4 days ago
We just delivered another SplashDrone4 to a satisfied customer in Mount Louisa QLD 4814
4 days ago
We just delivered another DJI Agras T40 to a satisfied customer in Dalyup WA 6450
5 days ago
We just delivered another DJI Mavic 3 Thermal to a satisfied customer in Welshpool WA 6106
5 days ago
We just delivered another DJI Mavic 3 Multispectral to a satisfied customer in East Launceston Tasmania 7250
5 days ago
We just delivered another DJI Agras T40 to a satisfied customer in Bethanga VIC 3691
5 days ago
We just delivered another DJI Agras T40 to a satisfied customer in Perthville NSW 2795
7 days ago
We just delivered another DJI Mavic 3 Multispectral to a satisfied customer in Kempsey NSW, 2440
7 days ago
We just delivered another Chasing Gladius Mini Underwater Drone to a satisfied customer in Newport NSW 2106
7 days ago
We just delivered another DJI Phantom 4 RTK + Mobile Station to a satisfied customer in Farnborough QLD 4703
7 days ago
We just delivered another DJI Mavic 3 Multispectral to a satisfied customer in Hillston NSW 2675
8 days ago
We just delivered another DJI Mavic 3 Enterprise to a satisfied customer in Warburton VIC 3799
9 days ago
We just delivered another DJI Agras T40 to a satisfied customer in Stanley Flat SA 5453
11 days ago
We just delivered another DJI Mavic 3 Thermal to a satisfied customer in West Bathurst NSW, 2795
12 days ago
We just delivered another DJI Agras T40 to a satisfied customer in Singleton NSW, 2330
12 days ago
We just delivered another Matrice 300 RTK to a satisfied customer in Longerenong VIC, 3401
12 days ago
We just delivered another DJI Mavic 3 Multispectral to a satisfied customer in Wonthaggi VIC 3995
13 days ago
We just delivered another DJI Mavic 3 Enterprise to a satisfied customer in Sheedys Gully NSW, 2790
13 days ago
We just delivered another DJI Agras T40 to a satisfied customer in Wirrabara 5481 SA
13 days ago
We just delivered another DJI Matrice 300 to a satisfied customer in Ceduna SA 5690
15 days ago
We just delivered another DJI Mavic 3 Thermal to a satisfied customer in Kelso NSW 2795
16 days ago
We just delivered another DJI Agras T40 to a satisfied customer in Quairading WA 6383
17 days ago
We just delivered another DJI Mavic 3 Enterprise to a satisfied customer in Geelong VIC, 3220
17 days ago
We just delivered another DJI Matrice 30T to a satisfied customer in Imbil QLD 4570
17 days ago
We just delivered another DJI Agras T20 to a satisfied customer in Hazelwood North VIC 3840
17 days ago
We just delivered another DJI Mavic 3 Multispectral to a satisfied customer in Palmwoods QLD 4555
19 days ago
We just delivered another DJI Mavic 3 Enterprise to a satisfied customer in NERANG QLD, 4211
19 days ago
We just delivered another DJI Agras T40 to a satisfied customer in Lexton VIC 3352
21 days ago
We just delivered another DJI Mavic 3 Thermal to a satisfied customer in Quairading WA 6383
21 days ago
We just delivered another DJI Mavic 3 Enterprise to a satisfied customer in Osborne Park WA 6017
22 days ago
We just delivered another DJI Mavic 3 Multispectral to a satisfied customer in Mount Melville WA, 6330
23 days ago
We just delivered another DJI Agras T40 to a satisfied customer in Osmington WA 6285
24 days ago
We just delivered another DJI Agras T30 to a satisfied customer in Coochin Creek QLD 4519
24 days ago
We just delivered another DJI Agras T30 to a satisfied customer in Laidley QLD 4341
25 days ago
We just delivered another DJI Matrice 300 RTK to a satisfied customer in Samford QLD 452
28 days ago
We just delivered another DJI Matrice 300 to a satisfied customer in Somerville VIC 3912
28 days ago
We just delivered another DJI Mavic 3 Thermal to a satisfied customer in Hampton NSW 2790
29 days ago
We just delivered another DJI Agras T40 to a satisfied customer in Mosman NSW 2088
29 days ago
We just delivered another Swan K1 Pro to a satisfied customer in Atherton QLD 4883
29 days ago
We just delivered another DJI Mavic 3 Multispectral to a satisfied customer in Humula NSW 2652
30 days ago
We just delivered another DJI Agras T30 to a satisfied customer in Brigalow QLD 4412
30 days ago
We just delivered another SplashDrone4 to a satisfied customer in Ravenswood WA 6208
30 days ago

We will email you with current pricing and ETA, and again later when DJI Zenmuse P1 stock is within 7 days away.