Gavin A.

- Service provider of Survey 2D/3D Mapping and Industrial Inspections
- Over 1300 hours of real flight hours of 'on the job experience', flying my Multi-Rotor and Fixed Wing
- Suitable for small to medium areas of interest, but will tackle larger projects
- Pride myself on attention to detail, customer relationships and presenting good quality deliverables
- No bull, just good trustworthy service
- Provide deliverable Spatial data in multi GIS formats (GeoTiff, .dxf, .gpx, shapefile, kml, kmz), as required
- RePL <25kg Multirotor, <25kg PL VTOL and <7kg Fixed Wing
- Endorsement : DJI T40 (101kg)
- Own and operate DJI Mavic 3E RTK, M210 RTK V2, DJI Avata, Phantom 4 Pro
- Own DJI D-RTK 3 Network Base Station / GCP Rover
- M210 suitable for ‘LoS’ projects and has dual downward and single upward facing Gimbals, with Payloads : X7 and Z30
- Proficient in using flight planning software ie UgCS, and DJI Pilot 2 and other platforms such as Autofly Unleashed and Qgound control etc
- Proficient in using QGIS and other GIS platforms such as Global Mapper
- Create and process captured data in WebODM, Pix4D and DroneDeploy
- Reasonable hourly, half day and full day rates
- Fully mobile I.e. able to charge batteries on site
- Over 10 years in flying fixed and rotor drone Aircraft
- Over 5 years experience in the Aviation Industry
- Over 20 years experience in the Construction Industry
- Over 15 years in Sales experience
- Can 'DO' attitude along with age maturity
- No Job too big or small!
- Up-to-date Aircraft & Pilot logs
- Public Liability

Base $60/hour, with keen Half day and Full day rates

WebODM (Open Drone Map), QGIS, UgCS, Pilot 2

DJI Mavic 3E, D-RTK 3 GNSS, M210RTK V2, Phantom 4Pro, and hire equipment

>1300hours, since 2015