DJI Zenmuse P1

Short video
DJI Zenmuse P1 review video 1
Long video
DJI Zenmuse P1 review video 2

DJI Zenmuse P1

3 currently viewing | 4 left in stock
The DJI Zenmuse P1 will likely sell-out in the next 8 days.
Page updated by Leo W. on May 3, 2021
quote The Zenmuse P1 integrates a full-frame sensor with interchangeable fixed-focus lenses on a 3-axis stabilized gimbal. Designed for photogrammetry flight missions, it takes efficiency and accuracy to a whole new level. quote
Leo – DFH Software Engineer

Consider The $150k Instant Asset Write-off Tax Break for your drone purchase
Sale is currently on, see pricing in the bundles below
5 good reasons to order with DFH
The Zenmuse P1 integrates a full-frame sensor with interchangeable fixed-focus lenses on a 3-axis stabilised gimbal. This payload is specifically designed for photogrammetry flight missions and takes efficiency/accuracy to a whole new level.

Accuracy without GPS: 3 cm horizontally / 5 cm vertically
High Efficiency: 3 km surface area covered in a single flight with a photo taken every 0.7s during flight.
Full-Frame Sensor: 45 MP low-noise Sensor, 4.4 um Pixel Size.
Gimbal: 3-axis stabilised gimbal with smart oblique capture
Global Mechanical Shutter: Maximum shutter speed of 1/2000 seconds.
Timesync 2.0: Synchronisation at the microsecond level across modules.
Versatility: Created 2D, 3D and detailed models.
Lens compatibility: Supports 24/35/50mm lenses with DJI DL Mounts.

Work Smart, Work Fast

Smart Oblique Capture
Cover 7.5km in a single workday with the P1. Smart Oblique Capture elevates the efficiency of your mission where the gimbal will automatically rotate to take photos at the different angles needed. Only photos essential to the reconstruction will be taken at the edge of the flight area, meaning your post processing efficiency is increased 20% up to 50%.

Fieldwork Report
Verify the data quality immediately post-flight by checking the position data and number of images acquired, as well as RTK status and positioning accuracy.

Smart Data Management
All your mission data management is streamlined.
— Mission results files are automatically associated with the mission name and mission time.
— A centralised storage location for photos, GNSS data and TimeStamps MRK files.
— The image metadata contains the cameras intrinsic and extrinsic parameter of the status of RTK.

A Mission Mode for Any Scenario

2D Orthomosaic Mission: Generate orthomosaics without GCPs using the P1, perfect for medium to large-area operations. 3D Oblique Mission: Effortlessly acquire oblique images from multiple angles that meet the 3D modelling requirements across industries such as urban planning and centimeter-level accurate cadastral surveys to serve 3D reality models and smart city planning.
Detailed Modelling Mission: Acquire ultra-high resolution image data of vertical or slanted surfaces from a safe distance that faithfully recreates subtle textures, structures and features for detailed reconstructions, geological surveys, heritage site conservation, hydraulic engineering and more.
Real-time Mapping Mission: Gather geographic information of large areas in real-time using DJI Terra so that teams can make crucial decisions quickly on site.


4 in stock, more coming
Free shipping Australia wide (most addresses)

General

  • Product Name

  • ZENMUSE P1
  • Dimensions

  • 198×166×129 mm
  • Weight

  • Approx. 800 g
  • Power

  • 20W
  • IP Rating

  • IP4X
  • Supported Aircraft

  • Matrice 300 RTK
  • Operating Temperature Range

  • -20° to 50° C (-4° to 122° F)
  • Storage Temperature Range

  • -20° to 60° C (-4° to 140° F)
  • Absolute Accuracy

  • Horizontal: 3 cm, Vertical: 5 cm *
    * Using Mapping Mission at a GSD of 3 cm and flight speed of 15 m/s, with an 75% front overlap rate and a 55% side overlap rate.

Camera

  • Sensor

  • Sensor size (Still): 35.9×24 mm (Full frame)
    Sensor size (Max video recording area): 34×19 mm
    Effective Pixels: 45MP
    Pixel size: 4.4 μm
  • Supported Lenses

  • DJI DL 24mm F2.8 LS ASPH(ENTERPRISE) (with lens hood and balancing ring/filter), FOV 84°
    DJI DL 35mm F2.8 LS ASPH(ENTERPRISE) (with lens hood and balancing ring/filter), FOV 63.5°
    DJI DL 50mm F2.8 LS ASPH(ENTERPRISE) (with lens hood and balancing ring/filter), FOV 46.8°
  • Supported SD Cards

  • SD: UHS-I rating or above; Max capacity: 512 GB
  • Storage Files

  • Photo / GNSS Raw Observation Data/ Image Log File
  • Photo Size

  • 3:2 (8192×5460)
  • Operation Modes

  • Photo, Video, Playback
  • Minimum photo interval

  • 0.7 s
  • Shutter Speed

  • Mechanical Shutter Speed: 1/2000*-1 s
    Electronic Shutter Speed: 1/8000-1 s
    *Aperature value no larger than f/5.6
  • Aperture Range

  • f/2.8-f/16
  • ISO Range

  • Photo: 100-25600
    Video: 100-25600

Video

  • Video Format

  • MP4
  • Video Resolution

  • 16:9 (1920×1080)
    16:9 (3840×2160)*
    *Only 35mm lens supported
  • Frame Rate

  • 60fps

Gimbal

  • Stabilized System

  • 3-axis (tilt, roll, pan)
  • Angular Vibration Range

  • ±0.01°
  • Mount

  • Detachable DJI SKYPORT
  • Mechanical Range

  • Tilt: -125° to +40°; Roll: -55° to +55°; Pan: ±320°
Basic parameters
The P1 takes photos with a resolution of 8192 * 5460, or approximately 45 megapixels.
Photos: JPEG, JPEG+DNG;
Videos: MP4.
0.7 second.
1/2000s to 1s.
4.4μm.
The P1 supports 24mm, 35mm and 50mm lenses with industry-specific DL mounts. Only use lenses engraved with the "DJI Enterprise" logo to produce survey-grade accurate results.
Currently the P1 supports only three industry-specific lenses. The lenses of the P1 are optimized for surveying and mapping scenarios, including optical parameter writing, lens performance recording, and reminders. Lenses with other DL mounts can take photos and videos manually when installed on the the Zenmuse P1 camera but cannot support surveying and mapping.
Suport M300 RTK, and currently can be installed only on the single downward gimbal of M300 RTK.
In photos taken by the P1, the exit pupil position at the center of the camera lens is recorded.
Zooming is not currently supported.First Waypoint Autofocus and Calibrated Infinity Focus can be used when in Mission Flight. Manual focus is required in Manual Flight.
The Low-noise and high-sensitivity mode of the P1 can improve camera sensitivity (ISO) while reducing noise levels, which expands the range of operatable scenarios for P1.
Output the exposure time interval in microseconds;
Time synchronization for the camera, the gimbal, the flight control system, and RTK;
Brand-new position and orientation compensation function which writes precise exit pupil positions of the camera into the photos based on the positions and orientations of the drone and the gimbal.
Functional features
This feature allows photos to be taken at multiple angles during a flight by way of payload control. All the ortho- and oblique photos necessary for 3D reconstruction can be acquired in a single flight path. Only photos essential to reconstruction will be taken at the edge of the flight area, minimizing the number of images taken and significantly increasing post-processing efficiency. Unique oblique capture strategies are applied to each flight path in different flight areas to ensure complete data capture in all the target areas. Flight speeds will vary in each flight segment as the camera rotates to capture oblique and ortho-photos in the most efficient manner possible, as determined by the algorithm. This feature is currently only available using the M300 RTK with the P1. To use the function, enable it in Mapping under Mission Flight settings in the DJI Pilot app.
The tilt angle range is from -45° to -90°.
Smart Oblique Capture lets users capture sufficient data for the selected measurement area. Photos will be taken from five different angles to cover the entirety of the area, including the edges.
As the camera’s shooting angle can be affected by the aircraft’s attitude during turns, buffer zones are added in the algorithm to account for this. No photos are taken at turning points to ensure that the P1 captures images at an accurate tilt angle.
When Task Resume is enabled in a Smart Oblique Capture mission, photos will be taken from all 5 directions at the point where the mission was last paused. Once the aircraft reaches the next waypoint, opblique photos will be taken according to the settings of that waypoint.
Each flight path section comes with a different oblique capture sequence, which means the time spent completing each sequence, and the speed at which each section is completed can vary, assuming a consistent overlap rate. The aircraft will operate at maximum efficiency in the Smart Oblique Capture mode.
In Smart Oblique Capture, only photos essential to reconstruction will be taken at the edge of the flight area. The shooting sequence executed depends on the size of the measurement area demarcated by the user, the flight altitude, and the camera’s tilt angle.
24mm lens: GSD=H/55;
35mm lens: GSD=H/80;
50mm lens: GSD=H/114;
Ground Sampling Distance GSD is measured in centimeters (cm)/pixel; target distance H is measured in meters (m).
The P1 can be used in multiple surveying and mapping scenarios including 2D orthomosaic, 3D oblique, detailed modeling, and real-time mapping.
After a flight mission is completed, a field work report is generated for pilots to quickly confirm the quality of field data on site. The information provided includes the location of each photo, the number of photos, RTK positioning status, and location accuracy.* *Follow-up support
The DJI P1 is connected to the payload health management system in DJI Pilot to record the service time of devices, historical abnormal status, usage count of the shutter, and swing count of the gimbal. Corresponding suggestions on abnormalities and maintenance are then provided to ensure the best performance for each task.* *Follow-up support
Yes. The task folder stores photos, original GNSS observations, and TimeStamps.MRK files, which are used for PPK post-processing calculations.
Currently, only DJI Pilot is supported.
The P1 supports the following operating modes: aerial photography (including Smart Oblique Capture), oblique photography, corridor mapping flight, waypoint flight, and manual operation.
The terrain-following flight path function is available in Mapping mode, but not in Oblique Photogrammetry, Corridor Mapping Flight, or Smart Oblique Capture modes.
No.


Trusted suppliers to (see more):


Featured in:


Official warranties only:
100% brand new factory-sealed official manufacturer’s warranty items.


More about the DFH shop

All bundles are customisable - just ask! [email protected] or 1300 029 829
Zenmuse P1
$10,350 $9,450 $900 OFF
Customise Package
DJI Zenmuse P1   
$10150.0 $9450.0 $700 off
1 x $200 bonus credit for receiving customer job inquiries via DFH subscription   
$200.0 Free
We just delivered another DJI Phantom 4 RTK to a satisfied customer in NEWRYBAR NSW, 2479
1 day ago
We just delivered another DJI M600 Pro + 6 x TB48s to a satisfied customer in PALM BEACH QLD, 4221
1 day ago
We just delivered another DJI Phantom 4 Pro V2 + 128GB SD Card to a satisfied customer in Longreach QLD, 4730
2 days ago
We just delivered another Parrot Anafi Thermal to a satisfied customer in Adelaide SA, 5045
3 days ago
We just delivered another Parrot Anafi Work to a satisfied customer in Annandale NSW, 2038
4 days ago
We just delivered another Parrot Anafi Thermal to a satisfied customer in Booubyjan QLD, 4601
4 days ago
We just delivered another DJI Phantom 4 RTK + Mobile Station to a satisfied customer in Farnborough QLD 4703
5 days ago
We just delivered another DJI Phantom 4 Pro V2 to a satisfied customer in Brisbane City QLD, 4000
5 days ago
We just delivered another Parrot Anafi Work to a satisfied customer in Kirwan Qld, 4817
5 days ago
We just delivered another DJI Mavic 2 Pro to a satisfied customer in Moonta Bay SA, 5558
6 days ago
We just delivered another DJI Matrice 210 V2 + X5S Camera to a satisfied customer in NEUTRAL BAY NSW, 2089
6 days ago
We just delivered another Parrot Anafi Thermal to a satisfied customer in PORT MELBOURNE VIC, 3207
6 days ago
We just delivered another Parrot Anafi FPV to a satisfied customer in Kuranda QLD, 4881
7 days ago
We just delivered another DJI Phantom 4 Pro V2 to a satisfied customer in Sandy Bay Hobart TAS, 7005
7 days ago
We just delivered another Parrot Anafi Propellers 8 Pack + battery to a satisfied customer in MOUNT COOLUM QLD, 4573
8 days ago
We just delivered another DJI Mavic 2 Enterprise Dual to a satisfied customer in EAST TAMWORTH NSW, 2340
8 days ago
We just delivered another Matrice 300 RTK to a satisfied customer in Longerenong VIC, 3401
10 days ago
We just delivered another DJI Phantom 4 Pro V2 to a satisfied customer in Alice Springs NT, 0872
10 days ago
We just delivered another PGY Tech 75cm landing pad + ICOM IC-A16 Radio to a satisfied customer in KINGS LANGLEY NSW, 2147
10 days ago
We just delivered another Parrot Anafi Thermal to a satisfied customer in BRANYAN QLD, 4670
11 days ago
We just delivered another Sequoia + Multispectral Sensor to a satisfied customer in CLAYTON VIC, 3168
11 days ago
We just delivered another DJI Mavic 2 Pro + Fly More Kit to a satisfied customer in Alstonvale NSW 2477
12 days ago
We just delivered another DJI Phantom 4 Pro V2 to a satisfied customer in Tuncurry NSW 2428
12 days ago
We just delivered another DJI Mavic Air 2 Fly More Combo to a satisfied customer in OFFICER VIC, 3809
13 days ago
We just delivered another DJI Mavic 2 Enterprise Dual to a satisfied customer in SECRET HARBOUR WA, 6173
13 days ago
We just delivered another Parrot Anafi Thermal to a satisfied customer in Sunshine West VIC 3020
14 days ago
We just delivered another DJI Mavic 2 Enterprise Dual to a satisfied customer in NORLANE VIC, 3214
15 days ago
We just delivered another DJI Mavic 2 Enterprise Dual + Smart Controller to a satisfied customer in Peregian Springs QLD, 4573
16 days ago
We just delivered another Parrot Anafi Work to a satisfied customer in North Rocks 2151 NSW
16 days ago
We just delivered another DJI Matrice 210 V2 RTK to a satisfied customer in Hazelbrook NSW, 2779
17 days ago
We just delivered another Bluegrass Fields + Pix4D Fields to a satisfied customer in MUTCHILBA QLD, 4872
17 days ago
We just delivered another Parrot Anafi Thermal to a satisfied customer in Wangaratta South VIC, 3678
18 days ago
We just delivered another DJI Mavic 2 Pro + Smart Controller to a satisfied customer in Brighton QLD, 4017
18 days ago
We just delivered another DJI Mavic Air 2 Fly More Combo + Care Refresh to a satisfied customer in FRANKSTON SOUTH VIC, 3199
18 days ago
We just delivered another DJI Mavic 2 Pro + CrystalSky 7.85in Ultra Screen to a satisfied customer in ELERMORE VALE NSW, 2287
18 days ago
We just delivered another DJI Inspire 1 Propellers + Installation Kit to a satisfied customer in Longreach QLD, 4730
19 days ago
We just delivered another 2 x Parrot Anafi Thermal + 2 x 64GB SD Cards to a satisfied customer in PORT MELBOURNE VIC, 3207
19 days ago
We just delivered another DJI Mavic Air 2 to a satisfied customer in Possum Creek NSW 2479
20 days ago
We just delivered another DJI Mavic Air 2 Fly More Combo to a satisfied customer in Wonga QLD, 4873
21 days ago
We just delivered another DJI Phantom 4 Pro V2 to a satisfied customer in GREGORY WA, 6535
21 days ago
We just delivered another DJI Phantom 4 Pro V2 + 128GB SD Card to a satisfied customer in Westdale NSW 2340
22 days ago
We just delivered another DJI Phantom 4 Pro V2 + 64GB SD Card to a satisfied customer in LONGREACH QLD, 4730
22 days ago
We just delivered another Parrot Anafi FPV to a satisfied customer in St Marys SA 5042
23 days ago
We just delivered another DJI Mavic 2 Enterprise Dual to a satisfied customer in Buderim QLD, 4556
23 days ago
We just delivered another DJI Mavic 2 Zoom + Smart Controller to a satisfied customer in STRATHDOWNIE VIC, 3312
24 days ago
We just delivered another DJI Mavic 2 Pro + Smart Controller to a satisfied customer in Edwardstown SA,5039
25 days ago
We just delivered another Parrot Anafi Work to a satisfied customer in Canterbury NSW, 2193
25 days ago
We just delivered another DJI Phantom 4 Pro V2 to a satisfied customer in Logan Village QLD, 4207
26 days ago
We just delivered another DJI Mavic 2 Pro + Fly More Kit to a satisfied customer in Emerald QLD, 4720
26 days ago
We just delivered another Parrot Anafi Work to a satisfied customer in MELBOURNE VIC, 3000
26 days ago
We just delivered another DJI Mavic 2 Pro + Smart Controller to a satisfied customer in MOAMA NSW, 2731
26 days ago
We just delivered another PGY Tech Tablet Holder to a satisfied customer in McCracken SA, 5211
27 days ago
We just delivered another Bluegrass Fields + Pix4D Fields to a satisfied customer in ALDERLEY QLD, 4051
27 days ago
We just delivered another DJI Mavic Air 2 Fly More Combo to a satisfied customer in Wonga QLD, 4873
28 days ago
We just delivered another DJI Matrice 210 V2 + XT2 Thermal Sensor to a satisfied customer in TOORBUL QLD, 4510
28 days ago
We just delivered another DJI Phantom 4 Pro V2 to a satisfied customer in Bonnells Bay NSW, 2264
29 days ago
We just delivered another DJI Mavic Air 2 Fly More Combo to a satisfied customer in Marian QLD, 4753
29 days ago
We just delivered another DJI Phantom 4 Pro V2 + 128GB SD Card to a satisfied customer in LITTLEHAMPTON SA, 5250
29 days ago
We just delivered another Mavic 2 Zoom + Smart Controller to a satisfied customer in SOUTH WINDSOR NSW, 2756
29 days ago
We just delivered another DJI Phantom 4 Pro V2 + 128GB SD Card to a satisfied customer in Montville QLD, 4560
30 days ago
We just delivered another DJI Matrice 210 V2 + XT2 Thermal Sensor to a satisfied customer in COOMA NSW, 2630
30 days ago
We just delivered another DJI Phantom 4 RTK + HPRC Hard Case to a satisfied customer in FORBES NSW, 2871
30 days ago
We just delivered another DJI Matrice 210 V2 + Z30 Camera + XT2 to a satisfied customer in CHISWICK NSW, 2046
30 days ago