Aircraft & Flight Safety
What is the ingress protection (IP) rating of DJI Matrice 5T? Can it fly in the rain?
DJI Matrice 5T is rated IP55. Do not fly in rain heavier than 100 mm/24 hours. After operating in the rain, wipe the aircraft dry before storage to prevent moisture from affecting performance.
What does the sensing system of DJI Matrice 5T consist of?
- 6-directional fisheye vision system (4 upward, 2 downward)
- Horizontal rotating LiDAR
- Three-directional mmWave radar (forward, upward and downward)
- Downward ToF infrared sensor
How does the obstacle sensing system of DJI Matrice 5T perform?
Wire-level obstacle sensing capability:
- Transmission lines (21.6 mm steel-core aluminium stranded wire): supported at speeds up to 21 m/s when directly facing the line.
- Distribution lines (12 mm steel-core aluminium stranded wire): supported at speeds up to 15 m/s when directly facing the line.
Performance varies depending on environmental conditions, including fog, rain and snow, as well as the material, position and shape of the obstacle. The aircraft cannot actively avoid fast-moving objects. The mmWave radar function may also be unavailable or restricted in certain countries or regions.
Does the DJI Matrice 5 Series Battery support hot-swapping?
No. The battery does not support hot-swapping.
What are the European certification classes for DJI Matrice 5T?
The aircraft holds EASA C2/C6 and UK CAA UK2/UK6 certifications. To meet EASA C5 or UK CAA UK5 operational requirements, a dedicated C5 (UK5) combo is required.
How do I activate DJI Matrice 5T?
First, connect the DJI RC Plus 3 Enterprise remote controller to the internet via Wi-Fi or a smartphone hotspot and follow the activation instructions. Once the remote controller is activated, connect it to the aircraft using DJI Pilot 2 and follow the on-screen instructions to activate the aircraft.
Without a 4G dongle or SIM card, how can I use Network RTK services with DJI Matrice 5T?
You can connect to Network RTK through the Wi-Fi connection on the remote controller.
Are Network RTK services bound to the remote controller or the aircraft?
Network RTK services are bound to the remote controller.
How many payload ports does DJI Matrice 5T have?
It features three external E-Port V3 ports for connecting compatible accessories and payloads.
Does DJI Matrice 5T come with high-altitude propellers?
No. However, the standard propellers support flights up to 7,000 metres above sea level.
What types of propellers does DJI Matrice 5T support?
DJI Matrice 5 Series Propellers and DJI Matrice 5 Series Anti-Ice Propellers.
Does DJI Matrice 5T support relay functionality? How many aircraft can be relayed simultaneously?
Yes. DJI Matrice 5T supports onboard relay functionality and can provide relay functionality for two additional Matrice 5T aircraft simultaneously. Avoid areas with strong electromagnetic interference. This feature is unavailable in countries or regions without 5 GHz frequency support.
Does DJI Matrice 5T support D-RTK 3?
Yes. However, it only supports DJI D-RTK 3 configured in Base Station mode.
Does DJI Matrice 5T support 4G Enhanced Transmission?
Yes. The aircraft features two built-in DJI Cellular Dongle 2 modules for enhanced connectivity.
Are DJI Matrice 5T accessories compatible with the DJI Matrice 4 Series?
No. DJI Matrice 5T accessories are not compatible with the DJI Matrice 4 Series.
Does DJI Matrice 5T support TimeSync 2.0 high-precision synchronisation?
Yes. TimeSync 2.0 provides:
- Precise mid-exposure timestamps with microsecond-level synchronisation.
- Synchronisation of system time across the camera, gimbal, flight controller and onboard RTK module.
- Real-time pose compensation using aircraft and gimbal attitude data.
- Precise camera optical centre positioning recorded in image metadata.
Camera & Thermal Imaging
Does DJI Matrice 5T support simultaneous photo or video capture with both the Wide and Tele cameras?
Yes. The Wide and Tele cameras support simultaneous photo or video capture.
What is the maximum number of photos DJI Matrice 5T can save in a single capture?
Up to four photos can be saved in a single capture, including Wide, Tele, Thermal and the current Fusion Mode view. The Fusion Mode image is only saved when Fusion Mode is enabled.
What is the difference between PIP and Overlay in Fusion Mode?
PIP (Picture-in-Picture) Mode: Displays the thermal image as an inset window within the visible-light image. If the zoom level exceeds the thermal camera's maximum zoom range, the two images automatically fuse.
Overlay Mode: Combines thermal and visible-light images once the visible-light zoom level reaches 2× or higher.
At what zoom level is monochrome night vision available?
Monochrome night vision can be enabled manually when the zoom level reaches 11× or higher.
Does the DJI Matrice 5T camera lens support defogging?
Yes. However, temporary fogging may occur on the lens surface when operating in environments with rapid temperature changes. This is normal and should dissipate shortly.
Why does the image become clearer when zooming to 26× or higher in well-lit environments?
Under good lighting conditions, the Tele camera automatically switches to an 8K mode at zoom levels of 26× or higher, improving image clarity.
Boat Launch
When the aircraft is placed on a vessel and Boat Launch mode is off, I see sensor error or ship speed too high warnings. What should I do?
Enable Boat Launch mode. These warnings will disappear once the mode is enabled.
When enabling Dynamic Home Point, a "Failed to Enable" message appears. How do I resolve this?
Turn off Dynamic Home Point and then turn it back on. If the issue continues, fully close DJI Pilot 2 and reopen the app.
After enabling Boat Launch, will obstacle sensing be turned off?
Yes. Downward obstacle sensing is automatically disabled to allow automatic take-off and landing from a vessel. If flying over land or other environments, check that downward obstacle sensing is enabled before continuing.
What should I be aware of when using Boat Launch?
- Take-off and landing are recommended from the rear of the vessel.
- Ideal operating conditions are vessel speeds below 10 knots and wind speeds below 5 m/s.
- Reserve a flat, unobstructed deck area of at least 3 m × 3 m with sufficient overhead clearance.
- Place the official landing point pattern in the centre of the area. Its size, colour and shape must match DJI specifications.
- Do not attach payloads to the underside of the aircraft.
- Monitor the live video feed and visually observe the surrounding environment during take-off and landing.
- When the landing pattern is detected, the controller provides sound and vibration alerts. Press C1 to trigger automatic landing.
- During automatic landing, continue holding the throttle stick down when the aircraft is above the landing pattern to encourage a fast descent.
- If the aircraft fails to recognise the landing pattern, it may ascend and exit landing mode if it rises above 20 metres.
After enabling Boat Launch, HMS indicates insufficient onboard satellite acquisition. What should I do?
This is normal. Remain stationary and wait for satellite signals to converge so the aircraft can obtain a stable position fix. This usually takes approximately 20–30 seconds, but may take longer in weak signal conditions.
After powering on, an IMU abnormality or large IMU deviation warning persists. What should I do?
Power on the aircraft while holding it in your hands. Once startup is complete, place the aircraft back on the vessel. The warning should disappear.
Power Line Inspection
What types of power lines are supported by the Power Line Inspection feature?
In windless conditions, the feature supports single-, twin-, quad-, hexa- and octo-bundled conductors, as well as ground wires, with an inclination of less than 40°.
Do I need to enable RTK for the Power Line Inspection feature?
No. RTK is not mandatory. The aircraft can automatically follow changes in power line elevation (sag) during lateral flight without requiring pre-built 3D models or high-accuracy flight routes. However, RTK is recommended if you need to use photo POS data for defect localisation during post-processing.
Will the aircraft automatically bypass obstacles during a power line inspection?
No. If the aircraft encounters obstacles such as trees or buildings close to the lines, it will automatically brake and hover. The pilot must manually fly over the obstacle, capture the missed conductor section and then resume the inspection task.
Can I perform inter-phase (centre phase) conductor inspection?
DJI does not recommend flying between phases for safety reasons, as the Matrice 5T needs to operate in close proximity to the conductors.
Can I adjust the gimbal angle during an inspection?
Yes. You can manually adjust the gimbal pitch during the inspection.
How can I achieve high-quality results during inspections?
DJI recommends conducting inspections on clear, well-lit days. If photos appear blurry or grainy, try reducing the shooting distance, increasing the zoom level or reducing flight speed.
Where is the Power Line Inspection feature available?
The feature is available globally.
Will I get better results if I set the camera to 8K mode?
No. The Power Line Inspection feature does not support 8K mode. Using 8K provides minimal visual improvement while consuming additional system resources and increasing the time between shots.
Can I save both wide-angle and thermal photos simultaneously?
No. Currently, this feature only saves photos captured by the zoom camera (visible-light imagery).
Remote Controller – DJI RC Plus 3 Enterprise
What is the purpose of the Antenna Panel on DJI RC Plus 3 Enterprise?
- The Antenna Panel houses the built-in video transmission antennas. Direct the panel towards the aircraft during operation for optimal transmission quality.
- When the remote controller is activated, unfolding the Antenna Panel automatically powers on the device.
Is DJI RC Plus 3 Enterprise compatible with the Matrice 4 Series, Matrice 4D Series, Mavic 3 Enterprise Series, Matrice 3D Series or Matrice 350 RTK?
No. DJI RC Plus 3 Enterprise is not compatible with these aircraft series.
Can third-party USB-C chargers be used to charge DJI RC Plus 3 Enterprise?
Yes. However, DJI recommends using the USB-C port on the DJI 515W Power Adapter or a third-party USB Power Delivery (PD) charger with a minimum output of 65W.
Does DJI RC Plus 3 Enterprise support MSDK?
Yes. DJI RC Plus 3 Enterprise supports Mobile SDK (MSDK).
What is the function of the HOST port on DJI RC Plus 3 Enterprise?
The HOST port is reserved for development purposes and does not support charging.
Battery & Charging Hub
How long does it take to fully charge a DJI Matrice 5 Series Battery?
When using the standard DJI 515W Charging Hub and DJI 515W Power Adapter at an ambient temperature of 25°C:
- 0% to 100%: approximately 45 minutes.
- 0% to 95%: approximately 40 minutes.
- 10% to 95%: approximately 31 minutes.
Charging times may increase at higher or lower temperatures depending on ambient conditions and battery status.
Does the DJI Matrice 5 Series Battery support self-heating?
Yes. The battery supports self-heating in low-temperature conditions.
What precautions should be taken when inserting or removing the battery? How do I confirm it is properly installed?
The battery compartment uses a dual-stage latch design. Push the battery firmly into the aircraft until it engages the second stage. To confirm correct installation, ensure the orange markings on the battery are completely hidden from view.
What are the functions of the USB-C port on the DJI Matrice 5 Series Charging Hub?
The USB-C port supports firmware updates and provides power output to external devices.
What is the maximum charging power of the DJI Matrice 5 Series Charging Hub?
The maximum charging power is 515W.
What causes the prompt "Battery communication error. Return to home or land promptly" during flight?
This is typically caused by the battery not being fully engaged into the second-stage latch before take-off. Return to home or land immediately and verify that the battery is securely installed.
Software & FlightHub 2
How do I upgrade the firmware of DJI Matrice 5T?
There are three methods:
- Connect the aircraft to a computer and use DJI Assistant 2 (Enterprise Series) to upgrade the aircraft and remote controller firmware.
- Use DJI Pilot 2 to update the aircraft and remote controller.
- Download the offline firmware update package from DJI's official website and insert the SD card containing the package into the remote controller to perform an offline update.
What apps are supported by DJI Matrice 5T?
DJI Matrice 5T supports the DJI Pilot 2 app and other software developed using DJI Mobile SDK (MSDK).
Does DJI Matrice 5T support Dual Operator Mode (two remote controllers controlling a single aircraft)?
No. Dual Operator Mode is not supported.
Does DJI Matrice 5T support integration with DJI FlightHub 2 for remote control of the aircraft and payloads?
Yes. DJI FlightHub 2 supports remote control of flights, gimbal cameras, PSDK accessories and route-related functions.
Open Developer Ecosystem
Which kinds of SDK development does DJI Matrice 5T support?
DJI Matrice 5T supports:
- Payload SDK (PSDK)
- Mobile SDK (MSDK)
- Cloud API
For technical support, contact
[email protected].
How can I access information and technical support for the DJI Matrice 5T Intelligent Algorithm Developer?
Visit the DJI Developer website for technical documentation and development resources, or contact
[email protected] for technical assistance.
General Information
Can I use DJI Matrice 5T across different countries or regions?
Please confirm the applicable countries and regions with your authorised dealer before purchasing, as availability and regulatory requirements may vary.
Does DJI Matrice 5T come standard with DJI Cellular Dongle 2?
Yes. DJI Matrice 5T features two built-in DJI Cellular Dongle 2 modules. They act as mutual backups and consume their respective mobile data simultaneously.
DJI AS2 Speaker
What functions are supported with the DJI AS2 Speaker?
The AS2 Speaker supports:
- Real-time voice broadcasting.
- Voice recording.
- Media file import and playback.
- Text-to-speech conversion.
- Echo cancellation.
- Five-colour strobe lighting for search and rescue operations.
Which aircraft are compatible with the DJI AS2 Speaker?
The DJI AS2 Speaker is exclusively compatible with the DJI Matrice 5T.
What are the installation precautions for the DJI AS2 Speaker?
- Insert the speaker's USB-C connector into the corresponding aircraft port and press firmly to ensure a secure seal for optimal water resistance.
- Align the mounting screws with the aircraft screw holes and tighten securely using the supplied tool.
- After installation, connect to the internet, activate the speaker and calibrate the aircraft compass according to the app instructions.
- Install the latest firmware if prompted.
What are the usage precautions for the DJI AS2 Speaker?
- Installing the speaker affects aircraft propulsion performance and flight time. Fly with caution.
- Use the standard remote controller to play human voices for optimal playback quality.
- Avoid playing single-frequency sounds, as this may cause irreversible damage to the speaker.
- Do not use the speaker near people or in urban areas with noise-sensitive structures, as excessive volume may cause accidents or injuries.
What are the tips for using the real-time broadcasting feature?
Speak close to the microphone at the top of the remote controller and maintain a steady speaking pace.
What shortcut operations does the DJI AS2 Speaker support?
It supports shortcuts to start and stop real-time broadcasting. These functions can be assigned to the customisable buttons on the remote controller under Customize RC Buttons in DJI Pilot 2.
How do I upgrade the firmware of the DJI AS2 Speaker?
The speaker is updated together with the aircraft firmware. There are three available methods:
- Connect the aircraft to a computer and use DJI Assistant 2 (Enterprise Series).
- Use the firmware upgrade option on the main screen of the app.
- Accept the consistency upgrade prompt when displayed in the app.
DJI AL2 Spotlight
What functions are supported with the DJI AL2 Spotlight?
The spotlight supports two main operating modes:
- Lighting Mode: Flood, Spotlight and All.
- Strobe Mode: Slow Flash, Fast Flash and Alternating.
It also supports enabling or disabling the Follow Gimbal Orientation function.
Which aircraft are compatible with the DJI AL2 Spotlight?
The DJI AL2 Spotlight is exclusively compatible with the DJI Matrice 5T.
What are the installation precautions for the DJI AL2 Spotlight?
- Unfold the spotlight arms on both sides before installation.
- Insert the USB-C connector into the corresponding aircraft port and press firmly to ensure a secure seal for optimal water resistance.
- Align the mounting screws with the aircraft screw holes and tighten securely using the supplied tool.
- Connect to the internet and activate the spotlight according to the app instructions.
- Install the latest firmware if prompted.
What are the usage precautions for the DJI AL2 Spotlight?
- Before powering on, ensure the spotlight lens faces upward. If it faces downward, the spotlight gimbal may hit the ground during its self-check and enter a protective state. The self-check will complete automatically after take-off.
- Installing the spotlight affects aircraft propulsion performance and flight time.
- When the spotlight is switched on, the aircraft vision system may be affected. Fly with caution.
- Never point the spotlight directly into people's eyes.
- The spotlight may become hot after prolonged operation. Take care to avoid burns.
What are the usage tips for the DJI AL2 Spotlight?
- At higher flight altitudes, atmospheric moisture and suspended particles may reduce image clarity. Enable electronic defogging for better image quality.
- Reduce spotlight brightness when appropriate and only switch it on when needed to minimise its impact on flight time.
Can the Follow Gimbal Orientation function be disabled?
Yes. You can disable Follow Gimbal Orientation in the spotlight settings. When disabled, the spotlight maintains its current angle. When re-enabled, it automatically aligns with the gimbal orientation. This function is enabled by default whenever the aircraft restarts.
What shortcut operations does the DJI AL2 Spotlight support?
It supports shortcuts to switch the spotlight on or off and enable strobe mode. These functions can be assigned to customisable remote controller buttons under Customize RC Buttons in DJI Pilot 2.
How do I upgrade the firmware of the DJI AL2 Spotlight?
The spotlight firmware is upgraded together with the aircraft firmware. Available methods include:
- Connect the aircraft to a computer and use DJI Assistant 2 (Enterprise Series).
- Use the firmware upgrade option on the main screen of the app.
- Accept the consistency upgrade prompt when displayed in the app.
Accessory Compatibility
Is there a specific installation order when mounting both the DJI AL2 Spotlight and DJI AS2 Speaker?
Yes. Install the DJI AL2 Spotlight first, followed by the DJI AS2 Speaker.
What are the transportation and storage precautions for the DJI AL2 Spotlight and DJI AS2 Speaker?
- Handle accessories carefully and avoid dropping them, as external impacts may cause damage or malfunction.
- When storing the spotlight, ensure its lens faces inward towards the aircraft body to prevent scratches.
- The aircraft can be stored directly in its carrying case with the spotlight installed.
Page updated by
Will D.
on November 9, 2026
Will – DFH tech team
November Sale: We’re adding these 6 items worth
$311.5
Frequently Bought Together
