DJI Zenmuse H20 & H20T

Short video
Short video
Long video
Long video

DJI Zenmuse H20 & H20T

5 currently viewing | 4 left in stock
Leaves warehouse in 1-2 days
Please note the global semiconductor chip shortage may affect our future inbound shipments including for the DJI Zenmuse H20 & H20T.
Page updated by Leo W. on October 16, 2021
quote Multi-sensor payloads that bring a whole new meaning to mission efficiency. The unique intelligence and integrated design provide unprecedented aerial imaging capabilities for a range of commercial drone applications. Welcome to DJI’s first hybrid sensor solution – the Zenmuse H20 Series. quote
Leo – DFH Software Engineer

Consider The $150k Instant Asset Write-off Tax Break for your drone purchase, valid till June 30, 2023
Sale is currently on, see pricing in the bundles below
5 good reasons to order with DFH
Zenmuse H20 & H20T

The H20 and H20T are IP44-rated multi-sensor cameras which ensure mission efficiency for a range of commercial drone applications, including firefighting, law enforcement, and search and rescue, as well as inspections of powerlines and within the oil and gas sectors.

With a 200x max. zoom you can see more than ever before with your drone camera.

The key features of these payloads, engineered exclusively for the DJI M300 RTK drone, are:

Zenmuse H20 - Triple-Sensor Solution
• 20MP Zoom Camera
• 12MP Wide Camera
• 1200m Laser Rangefinder

Zenmuse H20T - Quad-Sensor Solution
• 20MP Zoom Camera
• 12MP Wide Camera
• 1200m Laser Rangefinder
• 640×512 px Radiometric Thermal Camera


4 in stock, more coming
Free shipping Australia wide (most addresses)

General

  • Weight

  • Zenmuse H20: 678±5 g
    Zenmuse H20T: 828±5 g
  • Dimensions

  • Zenmuse H20: 150×114×151 mm
    Zenmuse H20T: 167×135×161 mm
  • Ingress Protection Rating

  • IP44
  • Operating Temperature

  • -20° to 50° C (Temperature Measurement is only available between -10° to 50° C)
  • Storage Temperature

  • -20° to 60° C
  • Laser Safety

  • Class 1M (IEC 60825-1:2014)
  • Supported Aircraft

  • Matrice 300 RTK

Gimbal

  • Angular Vibration Range

  • ±0.01°
  • Mount

  • Detachable
  • Controllable Range

  • Pitch: -120° to +30°
    Yaw: ±320°
  • Mechanical Range

  • Pitch: -132.5° to +42.5°
    Yaw: ±330°
    Roll: -90° to +60°

Zoom Camera

  • Sensor

  • 1/1.7" CMOS, 20 MP
  • Lens

  • DFOV: 66.6°-4°
    Focal length: 6.83-119.94 mm (equivalent: 31.7-556.2 mm)
    Aperture: f/2.8-f/11 (normal), f/1.6-f/11 (night scene)
    Focus: 1 m to ∞ (wide), 8 m to ∞ (telephoto)
  • Focus Mode

  • MF/AF-C/AF-S
  • Exposure Mode

  • Auto, Manual
  • Exposure Compensation

  • ±3.0 (1/3 increments)
  • Metering Mode

  • Spot metering, Center-weighted metering
  • AE LOCK

  • Supported
  • Electronic Shutter Speed

  • 1 ~ 1/8000 s
  • ISO Range

  • Video: 100 - 25600
    Photo: 100 - 25600
  • Video Format

  • MP4
  • Video subtitles

  • Supported
  • Photo Size

  • 5184 × 3888
  • Photo Format

  • JPEG

Wide Camera

  • Sensor

  • 1/2.3" CMOS, 12 MP
  • Lens

  • DFOV: 82.9°
    Focal length: 4.5 mm (equivalent: 24 mm)
    Aperture: f/2.8
    Focus: 1 m to ∞
  • Exposure Mode

  • Auto
  • Exposure Compensation

  • ±3.0 (1/3 increments)
  • Metering Mode

  • Spot metering, Center-weighted metering
  • AE LOCK

  • Supported
  • Shutter Speed

  • 1 ~ 1/8000
  • ISO Range

  • Video: 100 - 25600
    Photo: 100 - 25600
  • Video Format

  • MP4
  • Video subtitles

  • Supported
  • Photo Size

  • 4056 x 3040
  • Photo Format

  • JPEG

Thermal Camera (Zenmuse H20T)

  • Sensor

  • Uncooled VOx Microbolometer
  • Lens

  • DFOV: 40.6°
    Focal length: 13.5 mm (equivalent: 58 mm)
    Aperture: f/1.0
    Focus: 5 m to ∞
  • Digital Zoom

  • 1x, 2x, 4x, 8x
  • Video Resolution

  • 640×512 @ 30 Hz
  • Video Format

  • MP4
  • Image Resolution

  • 640×512
  • Image Format

  • R-JPEG (16 bit)
  • Pixel Pitch

  • 12 μm
  • Spectral Band

  • 8-14 μm
  • Sensitivity (NETD)

  • ≤50 mK @ f/1.0
  • Temperature Measurement Method

  • Spot Meter, Area Measurement
  • Scene Range

  • -40 °C to 150 °C (High Gain)
    -40 °C to 550 °C (Low Gain)
  • Temperature alert

  • Supported
  • FFC

  • Auto/ manual
  • Palette

  • White hot/Fulgurite/Iron Red/Hot Iron/Medical/Arctic/Rainbow 1/Rainbow 2/Tint/Black Hot

Laser Rangefinder

  • Wave length

  • 905 nm
  • Measurement range

  • 3-1200 m (to a vertical surface with ≥12m diameter and 20% reflection rate)
  • Measurement accuracy

  • ± (0.2 m + D×0.15%)
    D is the distance to a vertical surface

Features

  • Hybrid Optical Zoom

  • 23×(DFOV:4°,EQV:556.2mm)
  • Max. Zoom

  • 200×(DFOV:0.5°,EQV:4800mm)
  • One Click Capture

  • One click to save the video or picture of 3 cameras (zoom, wide and thermal camera) simultaneously
  • Point to Aim

  • Double click on the wide/thermal camera view, then the system will automatically move the gimbal to focus on the point of interest
  • High-Res Grid Photo

  • Frame an area of interest in wide camera view, and the zoom camera will automatically capture a set of 20 MP images of the area. These images are stored together with an overview image that can be viewed in greater detail.
  • Night Scene

  • Supported (zoom camera)
  • Timestamp

  • Including GPS, date, and time

Storage

  • Supported SD Card

  • MicroSD card (Max capacity: 128 GB, UHS-1 Speed Grade 3 required)
  • Supported File Systems

  • FAT32 (≤ 32 GB), exFAT (> 32 GB)
  • Recommended Micro SD Cards

  • TOSHIBA EXCERIA PRO 32GB micro SD HC II
    SanDisk_Extreme PRO_32GB_3_A1_micro SD V30 HC I
    TOSHIBA EXCERIA PRO 64GB micro SD XC II
    SanDisk_Extreme PRO_64GB_3_A2_micro SD V30 XC I
    SAMSUNG_EVO_128GB_micro SD 3 XC I
    TOSHIBA EXCERIA M303E 32GB micro SD HC I
    TOSHIBA EXCERIA M303E 64GB micro SD XC I
    TOSHIBA EXCERIA M303E 64GB micro SD XC I
    TOSHIBA EXCERIA M303 128GB micro SD XC I
    SAMSUNG_EVO_64GB_micro SD 3 XC I
The Zenmuse H20 Series has 2 models: the Zenmuse H20 (Triple-sensor model with a wide-angle camera, a zoom camera, and a laser rangefinder) and the Zenmuse H20T (quad-sensor model with a wide-angle camera, a zoom camera, a laser rangefinder, and a radiometric thermal camera)
Under controlled laboratory conditions, the Zenmuse H20 Series meets the IP44 protection level under the IEC60529 standard. The protection level is not permanently effective, and will weaken with wear and tear.
• Make sure the gimbal connector interface and gimbal surface are dry and free of moisture before installing the gimbal.
• Before use, make sure that the gimbal is firmly installed onto the aircraft, and the SD card cover is clean, free of foreign objects, and securely closed.
• Before opening the SD card cover, wipe the surface of the body clean.
Radiometric thermal camera: R-JPEG, 640×512 px
Wide-angle camera: JPEG, 4056×3040 px
Zoom camera: JPEG, 5184×3888 px
Radiometric thermal camera: 640×[email protected]
Wide-angle camera:1920×[email protected]
Zoom camera: 3840×[email protected] / 1920×[email protected]
MP4 encoded with H.264 compression
23× hybrid optical zoom, 200× max zoom
The higher the zoom factor, the longer the focusing distance.

1×-2.8×, the minimum focusing distance is 1 m.
2.9×-3.9×, the minimum focusing distance is 2 m.
4×-4.6×, the minimum focusing distance is 3 m.
4.7×-14.2×, the minimum focusing distance is 5 m.
14.3×-200×, the minimum focusing distance is 8 m.

If the object is within the minimum focusing distance, the camera will not be able to focus. For example, if the aircraft/payload is 5 m away from a pylon, the camera will not be able to focus at a zoom level greater than 14.2×.
Laser rangefinders measure distance using the time of flight of light. Their accuracy could be affected in environments where this ToF is affected: The range will be reduced in smoke, rain, snow, dust, and other environments, and data readings may be jumbled.
When measuring an object with glass or transparent components:
If the glass is within moderate distance, the distance to the glass will be measured (not the object behind the glass)
The glass may reflect the laser beam to other locations, resulting in the distance to other locations.
If the surface of the glass is very smooth or too close, the light will pass through the glass to detect the objects behind, but the range will be significantly reduced.
30 fps.
The accuracy is ±2 °C or ±2%, whichever is greater. (Measured at 25 °C in a windless laboratory, 5 m away from the black body).
Note: black bodies have different emissivity levels, the measurement above is is based on the particular black body measured and for reference only.
The reflectivity of objects: shiny metals have higher reflectivity will result in lower accuracy and lower temperature readings.
The temperature of background radiation: a clear, sunny day will have less of an effect on accuracy than a cloudy day.
Air temperature and humidity: the higher the temperature and humidity, the more likely the readings will be affected, and the lower the accuracy.
Distance between the camera and the object: the farther away the object is from the camera, the lower the accuracy.
High gain mode: displays a smaller temperature measurement range at a high quality, the temperature measurement range is -40 °C to 150 °C.
Low gain mode: displays a larger temperature range at relatively lower quality, the temperature measurement range is -40 °C to 550 °C.
Yes. It supports 2×, 4×, and 8× digital zoom.
Flat-Field Calibration is used to optimize thermal image quality so temperature changes can be observed more easily. You can choose to manually enable FFC by turning off the automatic FFC adjustment in settings.
There are two ways: Spot Meter for measuring a single position, and Area Measurement for getting different readings in an area.
The Zenmuse H20T only has one model. Its thermal camera has a focal length of 13.5 mm (F1.0), equivalent focal length: 58mm, DFOV 40.6°
You can process them using DJI Thermal Analysis Tool. Download it here: https://www.dji.com/zenmuse-h20-series/downloads
The Zenmuse H20 Series is designed to prevent water damage to the camera components. But if the humidity is too high or if the payload is exposed to rain, water vapor could still enter the camera. Once powered on, the electrical components will heat up, causing the water vapor to evaporate, resulting in condensation or fog on the lens. This can usually be solved by turning on the aircraft/payload and waiting for the water vapor to dissipate. When not in use, we recommend you store the payload in a designated case or a cool, dry place with a relative humidity of less than 40%.
A protective material that protects against moisture is added between the lens and the protective glass to prevent moisture condensation on the protective glass. But it could be saturated with moisture if the humidity of the storage location is too high or if a wet payload is put back into the box. This could cause the protective glass to fog up, and it might take a while for the fog to dissipate once turned on. You can use a blow dryer to speed up the process. Again, we recommend wiping the payload dry after water exposure, and storing it in a designated case or a cool, dry place with a relative humidity of less than 40%.
In Night Scene Mode, the camera will switch the IR filter and adjust the ISP parameters to optimize for lowlight environments.
In DJI Pilot, by dragging to select an area in wide camera view, an image will be taken using the wide-angle camera while the gimbal rotates to automatically capture a series of photos at 20 MP of the selected area using the zoom camera at the current zoom level. All of the images captured will be stored in the same sub-folder on the SD card, generating an HTML file that can be opened in a web browser to view the overview image and the detailed close-up images.
128 GB. We recommend using a UHS-I Speed Grade 3 Micro SD card.
Currently, the Zenmuse H20 Series only supports the Android version of DJI Pilot.
Yes. Updating to the latest firmware version is required
Yes. Updating to the latest firmware version is required
They are compatible with the Matrice 300 RTK. Please update both the aircraft and the remote controller with the latest firmware.
They can both be mounted onto any one of the three gimbal ports on the M300 RTK.
Before upgrading, please ensure that the aircraft is powered off, the Zenmuse H20 series gimbal and camera is securely mounted onto the aircraft, the microSD card has enough storage space, and that the intelligent flight battery has enough power.


1. Visit the official DJI website and enter the Downloads section of the Zenmuse H20 Series product page.

2. Download the latest firmware package.
3. Store the downloaded firmware package onto the root directory of the microSD card.
4. Insert the microSD card into the microSD card slot of the Zenmuse H20 series gimbal and camera.
5. Power on the aircraft, and the gimbal will start to perform a self-check, and then automatically upgrade the firmware. Then, the buzzer will beep to indicate the status.
6. Please restart all devices after the update is completed.


 Gimbal upgrade status description:
4 short beeps ...new firmware detected, ready to upgrade.
2 long beeps …upgrading firmware, do not stop the update.
1 long beep followed by 2 short beeps… The firmware update was successful.
Continuous long beep... The firmware update failed, please try to update again. Contact DJI support for help if needed.


 Notes:
• Please only store one version of firmware on the microSD card. Multiple versions of firmware stored in the microSD card will cause an upgrade failure.
• During the firmware upgrade, the alarm tone may disappear temporarily. Please be patient and ensure that the alarm tone is “1 long beep followed by 2 short beeps”, which indicates that the firmware upgrade was successful.
Do not power off the aircraft or detach the gimbal and camera from the aircraft during the upgrade, or it may damage the gimbal.
Do not aim the camera lens at high-energy power sources, such as the sun, lava, or laser beams. The temperatures of observation targets should not exceed 800 °C, or the camera could be irreversibly damaged.
Do not place the camera under direct sunlight, in places with poor ventilation, or near heaters.
Do not power on or off the camera too frequently. Please wait at least 30 seconds before restarting the camera, or it may affect the service life of camera chips.
Do not hot-swap the microSD card during use.
Do not touch the camera lens or scratch it with hard objects, as this could result in blurry images.
Please use a soft, dry cloth to clean the surface of the camera lens. Do not use alkaline detergents.
Please store the payload in a designated case that is kept dry and ventilated.
The Zenmuse H20 Series delivers useful insights in a variety of scenarios, for example, public safety applications including firefighting, fire prevention, search and rescue, and traffic law enforcement; energy industry application including asset and equipment inspection, geothermal energy exploration, and oil and gas inspection.
The Zenmuse H20 Series was not designed specifically to meet the accuracy requirements for aerial surveying, but you can use the wide-angle camera to capture images in Mapping missions in the DJI Pilot App.


Trusted suppliers to (see more):


Featured in:


Official warranties only:
100% brand new factory-sealed official manufacturer’s warranty items.


More about the DFH shop

All bundles are customisable - just ask! [email protected] or 1300 029 829
Zenmuse H20 (with DJI Care Enterprise Basic)
$7,086
Customise Package
DJI Zenmuse H20
$7,086
1 x DJI Care Enterprise Basic. Two replacements are offered if you crash. See DJI’s official webpage for full details   
Included
Zenmuse H20 (with DJI Care Enterprise Plus)
$7,386
Customise Package
DJI Zenmuse H20
$7,386
1 x DJI Care Enterprise Plus. Unlimited replacements are offered if you crash. See DJI’s official webpage for full details   
Included
Zenmuse H20T (with DJI Care Enterprise Basic)
$15,389
Customise Package
DJI Zenmuse H20T
$15,389
1 x DJI Care Enterprise Basic. Two replacements are offered if you crash. See DJI’s official webpage for full details   
Included
Zenmuse H20T (with DJI Care Enterprise Plus)
$15,989
Customise Package
DJI Zenmuse H20T
$15,989
1 x DJI Care Enterprise Plus. Unlimited replacements are offered if you crash. See DJI’s official webpage for full details   
Included
We just delivered another DJI Mavic Air 2 to a satisfied customer in Possum Creek NSW 2479
1 day ago
We just delivered another DJI Mavic Air 2 Fly More Combo to a satisfied customer in Wonga QLD, 4873
2 days ago
We just delivered another Parrot Anafi to a satisfied customer in Burleigh Heads QLD 4220
2 days ago
We just delivered another DJI Phantom 4 Pro V2 to a satisfied customer in GREGORY WA, 6535
2 days ago
We just delivered another DJI Agras T30 to a satisfied customer in Coochin Creek QLD 4519
3 days ago
We just delivered another DJI Mini 2 Fly More Combo to a satisfied customer in Maryland NSW 2287
3 days ago
We just delivered another DJI Tello EDU to a satisfied customer in Peak Hill NSW 2869
3 days ago
We just delivered another Parrot Anafi Work to a satisfied customer in Orange NSW 2800
3 days ago
We just delivered another DJI Phantom 4 Pro V2 + 128GB SD Card to a satisfied customer in Westdale NSW 2340
3 days ago
We just delivered another DJI Phantom 4 Pro V2 + 64GB SD Card to a satisfied customer in LONGREACH QLD, 4730
3 days ago
We just delivered another DJI Mavic 2 Enterprise Dual to a satisfied customer in Buderim QLD, 4556
4 days ago
We just delivered another DJI FPV to a satisfied customer in East Melbourne VIC 3002
5 days ago
We just delivered another DJI FPV to a satisfied customer in Surfers Paradise QLD 4217
5 days ago
We just delivered another DJI Mavic 2 Zoom + Smart Controller to a satisfied customer in STRATHDOWNIE VIC, 3312
5 days ago
We just delivered another DJI Mavic 2 Pro + Smart Controller to a satisfied customer in Edwardstown SA,5039
6 days ago
We just delivered another Parrot Anafi Work to a satisfied customer in Canterbury NSW, 2193
6 days ago
We just delivered another DJI Mini 2 to a satisfied customer in Waverley NSW 2024
7 days ago
We just delivered another DJI Matrice 300 to a satisfied customer in Somerville VIC 3912
7 days ago
We just delivered another DJI Phantom 4 Pro V2 to a satisfied customer in Logan Village QLD, 4207
7 days ago
We just delivered another DJI Mavic 2 Pro + Fly More Kit to a satisfied customer in Emerald QLD, 4720
7 days ago
We just delivered another Parrot Anafi Work to a satisfied customer in MELBOURNE VIC, 3000
7 days ago
We just delivered another DJI Mavic 2 Pro + Smart Controller to a satisfied customer in MOAMA NSW, 2731
7 days ago
We just delivered another DJI Mini 2 to a satisfied customer in Deception Bay QLD 4508
8 days ago
We just delivered another PGY Tech Tablet Holder to a satisfied customer in McCracken SA, 5211
8 days ago
We just delivered another SplashDrone4 to a satisfied customer in Ravenswood WA 6208
9 days ago
We just delivered another iFlight Titan XL5 BNF to a satisfied customer in Bacchus Marsh VIC 3340
9 days ago
We just delivered another DJI Mavic Air 2 Fly More Combo to a satisfied customer in Wonga QLD, 4873
9 days ago
We just delivered another DJI Matrice 210 V2 + XT2 Thermal Sensor to a satisfied customer in TOORBUL QLD, 4510
9 days ago
We just delivered another DJI Phantom 4 Pro V2 to a satisfied customer in Bonnells Bay NSW, 2264
10 days ago
We just delivered another DJI Mavic Air 2 Fly More Combo to a satisfied customer in Marian QLD, 4753
10 days ago
We just delivered another DJI Phantom 4 Pro V2 + 128GB SD Card to a satisfied customer in LITTLEHAMPTON SA, 5250
10 days ago
We just delivered another Mavic 2 Zoom + Smart Controller to a satisfied customer in SOUTH WINDSOR NSW, 2756
10 days ago
We just delivered another DJI Mavic 2 Enterprise Advanced to a satisfied customer in TAROOM QLD 4420
11 days ago
We just delivered another SplashDrone 3+ to a satisfied customer in Happy Valley SA 5159
11 days ago
We just delivered another DJI Phantom 4 Pro V2 + 128GB SD Card to a satisfied customer in Montville QLD, 4560
11 days ago
We just delivered another Parrot Anafi to a satisfied customer in Kensington VIC 3031
11 days ago
We just delivered another DJI Matrice 210 V2 + XT2 Thermal Sensor to a satisfied customer in COOMA NSW, 2630
11 days ago
We just delivered another DJI Phantom 4 RTK + HPRC Hard Case to a satisfied customer in FORBES NSW, 2871
11 days ago
We just delivered another DJI Matrice 210 V2 + Z30 Camera + XT2 to a satisfied customer in CHISWICK NSW, 2046
11 days ago
We just delivered another DJI Phantom 4 RTK to a satisfied customer in NEWRYBAR NSW, 2479
12 days ago
We just delivered another DJI M600 Pro + 6 x TB48s to a satisfied customer in PALM BEACH QLD, 4221
12 days ago
We just delivered another SplashDrone4 to a satisfied customer in Mount Louisa QLD 4814
13 days ago
We just delivered another DJI Phantom 4 Pro V2 + 128GB SD Card to a satisfied customer in Longreach QLD, 4730
13 days ago
We just delivered another DJI Mini 2 Fly More Combo to a satisfied customer in Sydney Olympic Park NSW 2127
14 days ago
We just delivered another DJI Mini 2 to a satisfied customer in Miandetta TAS 7310
14 days ago
We just delivered another Parrot Anafi Work to a satisfied customer in Annandale NSW, 2038
15 days ago
We just delivered another Chasing Gladius Mini Underwater Drone to a satisfied customer in Newport NSW 2106
16 days ago
We just delivered another DJI Phantom 4 Pro V2 to a satisfied customer in Murrurundi NSW 2338
16 days ago
We just delivered another DJI Phantom 4 RTK + Mobile Station to a satisfied customer in Farnborough QLD 4703
16 days ago
We just delivered another DJI Phantom 4 Pro V2 to a satisfied customer in Brisbane City QLD, 4000
16 days ago
We just delivered another Parrot Anafi Work to a satisfied customer in Kirwan Qld, 4817
16 days ago
We just delivered another DJI Mavic 2 Pro to a satisfied customer in Moonta Bay SA, 5558
17 days ago
We just delivered another DJI Matrice 210 V2 + X5S Camera to a satisfied customer in NEUTRAL BAY NSW, 2089
17 days ago
We just delivered another DJI Phantom 4 Pro V2 to a satisfied customer in Sandy Bay Hobart TAS, 7005
18 days ago
We just delivered another ICOM IC-A16-E Portable VHF AM Radio to a satisfied customer in Boronia VIC 3155
19 days ago
We just delivered another Parrot Anafi Propellers 8 Pack + battery to a satisfied customer in MOUNT COOLUM QLD, 4573
19 days ago
We just delivered another DJI Mavic 2 Enterprise Dual to a satisfied customer in EAST TAMWORTH NSW, 2340
19 days ago
We just delivered another Matrice 300 RTK to a satisfied customer in Longerenong VIC, 3401
21 days ago
We just delivered another DJI Phantom 4 Pro V2 to a satisfied customer in Alice Springs NT, 0872
21 days ago
We just delivered another PGY Tech 75cm landing pad + ICOM IC-A16 Radio to a satisfied customer in KINGS LANGLEY NSW, 2147
21 days ago
We just delivered another Sequoia + Multispectral Sensor to a satisfied customer in CLAYTON VIC, 3168
22 days ago
We just delivered another DJI Mavic 2 Pro + Fly More Kit to a satisfied customer in Alstonvale NSW 2477
23 days ago
We just delivered another DJI Phantom 4 Pro V2 to a satisfied customer in Tuncurry NSW 2428
23 days ago
We just delivered another DJI Matrice 600 Pro to a satisfied customer in Coffs Harbour, NSW 2450
24 days ago
We just delivered another DJI Mavic Air 2 Fly More Combo to a satisfied customer in OFFICER VIC, 3809
24 days ago
We just delivered another DJI Mavic 2 Enterprise Dual to a satisfied customer in SECRET HARBOUR WA, 6173
24 days ago
We just delivered another DJI Mavic 2 Enterprise Advanced to a satisfied customer in Garbutt QLD 4814
25 days ago
We just delivered another DJI Mavic 2 Enterprise Dual to a satisfied customer in NORLANE VIC, 3214
26 days ago
We just delivered another DJI Mavic 2 Enterprise Dual + Smart Controller to a satisfied customer in Peregian Springs QLD, 4573
27 days ago
We just delivered another Parrot Anafi Work to a satisfied customer in North Rocks 2151 NSW
27 days ago
We just delivered another DJI Matrice 210 V2 RTK to a satisfied customer in Hazelbrook NSW, 2779
28 days ago
We just delivered another DJI FPV to a satisfied customer in Red Hill VIC 3937
29 days ago
We just delivered another DJI Mavic 2 Pro + Smart Controller to a satisfied customer in Brighton QLD, 4017
29 days ago
We just delivered another DJI Mavic Air 2 Fly More Combo + Care Refresh to a satisfied customer in FRANKSTON SOUTH VIC, 3199
29 days ago
We just delivered another DJI Mavic 2 Pro + CrystalSky 7.85in Ultra Screen to a satisfied customer in ELERMORE VALE NSW, 2287
29 days ago