- Battery
- 1.What is the flight time of the M200 Series V2 drones?
No payload: M200 V2: 38 minutes, M210 V2: 34 minutes, M210 RTK V2: 33 minutes.
Full payload: M200 V2/M210 V2/M210 RTK V2: 24 minutes.
- 2.How long does it take to fully charge the TB55 Intelligent Flight Batteries of the M200 Series V2 drones?
When using an IN2CH Charging Hub, it takes 2 hours and 24 minutes to fully charge 2 TB55 batteries.
- 3.How do I maintain the TB55 Intelligent Flight Batteries?
1. To get the best performance of the batteries, it is recommended to mark 2 batteries as a pair before first use and continue using them as a pair (charge and discharge them together).
2. The ideal storage temperature for the batteries is between 22℃- 30℃. Do not store in humid places.
3. If not using the batteries for more than 10 days, discharge the batteries to 40%-65% of charge to store, charge and discharge them every 3 months to keep them fresh.
- 4.Can the TB55 Intelligent Flight Batteries be used in low-temperature environments?
The operating temperature of the TB55 Intelligent Flight Batteries is -20℃ to 50℃. Please note that flight time will decrease when using in cold environments. It is recommended to preheat the batteries to 15℃ before flight to ensure flight performance.
- 5.Can the TB55 Intelligent Flight Batteries be taken onto a flight in the carry-on baggage?
The battery has a capacity of 174.6Wh. Please follow the regulations and guidelines for traveling with these batteries via air.
- 6.Do the M200 Series V2 drones support TB50 batteries?
No, they do not.
- Propulsion
- 1.What is the maximum takeoff weight of the M200 Series V2 drones?
6.14kg.
- 2.What are the maximum payload weights of the M200 Series V2 drones?
When using TB55 Intelligent Flight Batteries:
M200 V2: 1.45kg; M210 V2: 1.34kg; M210 RTK V2: 1.23kg.
- Remote Controller
- 1.How long does it take to fully charge the remote controller?
It takes around 2 hours to fully charge a single WB37 Intelligent Battery that is installed in the remote controller, and around 1 hour and 11 minutes using the WCH2 Charging Hub.
- 2.How long does a fully charged WB37 battery last?
Up to 4 hours of continuous use when not powering a display monitor.
- 3.Can the M200 Series remote controller be used for the M200 Series V2?
No.
- 4.How are the remote controllers for V1 and V2 drones different visually?
There is a silver ring mark on the monitor mounting bracket on the M200 Series V2 remote controller, and on the back of the bracket there is a USB port.
- 5.What is the operating temperature of the remote controller?
The operating temperature is -20℃ to 50℃.
- 6.What output interfaces does the remote controller have?
SDI and HDMI.
- 7.Does the M200 Series V2 support Dual Remote Controller Mode?
Yes.To use two remote controllers, please ensure your firmware is v01.00.0450 or above. Please refer to the Dual Remote Controller Mode section of the user manual for instructions. Note: D-RTK 2 High Precision GNSS Mobile Station For Matrice Series cannot be used when using Dual Remote Controller Mode.
- Transmission
- 1.What transmission system is used in the M200 Series V2 drones?
OcuSync 2.0 transmission.
- 2.What is the actual transmission distance?
The actual transmission distance depends on the local communications standards.
Under some common regulatory bodies, examples of the transmission range is as follows:
FCC: 8km
CE/MIC: 5km
SRRC: 5km
- Gimbal Camera
- 1.What is the resolution of the FPV camera?
608*448.
- 2.Which gimbal cameras are compatible with M200 Series V2 drones?
Zenmuse X4S/X5S/X7/XT/XT2/Z30, and third-party payloads powered by DJI SkyPort and DJI X-Port.
- 3.What dual gimbal combinations are supported by the M210 V2/M210 RTK V2?
Please refer to the following for an explanation of how to properly mount your dual gimbal configuration. Left and right is determined from the perspective of looking directly at the drone from the front.
Right gimbal port: Zenmuse X4S/X5S/X7/XT2/Z30.
Left gimbal port: Zenmuse XT/Z30.
Note: when using the Zenmuse Z30 and X7 cameras together, they might obstruct each other's motion at certain angles. Please operate with caution.
Third-party payloads powered by DJI X-Port are also compatible in the following configurations:
1. To use the third-party payload on its own, mount it on the right gimbal port or the upward gimbal port.
2. If mounting the third-party payload on the left gimbal port, you must also mount a DJI payload on the right gimbal port or the upward gimbal port.
- 4.Can the two downward gimbal cameras be controlled simultaneously on the M210 V2/M210 RTK V2?
Yes, you can control the gimbal angles of both payloads and take still photos or videos using both.
- 5.Which gimbal cameras are supported in the upward gimbal mount of the M210 V2/M210 RTK V2 drones?
The upward gimbal port supports the Zenmuse X4S/X5S/X7/XT/XT2/Z30.
- 6.What upward+downward gimbal configurations are supported by the M210 V2/M210 RTK V2 drones?
Upward gimbal mount: Zenmuse X4S/X5S/X7/XT/XT2/Z30.
Left downward gimbal port: Zenmuse XT/Z30.
- 7.Can the upward and downward gimbal cameras be controlled simultaneously on the M210 V2/M210 RTK V2?
No, they cannot.
- 8.Can I adjust the FPV camera's angle using the remote controller?
After running the firmware v01.00.03.00, the tilt of the FPV camera can be adjusted by pressing the C2 button and the left dial (only when the C2 button's function is "undefined". This function will not be available if C2 has any other custom functions)
- 9.Which formats are supported by the Zenmuse X7 gimbal camera?
Still photography: JPEG/RAW/JPEG+RAW.
Video: MP4/MOV.
- 10.What should I keep in mind when using the upward gimbal?
1. You can only use an upward gimbal with M210 V2 and M210 RTK V2. The upward gimbal is not supported by the M200 V2.
2. If you are planning to use an upward gimbal with the M210 V2, please purchase an upward gimbal connector as well as an external GPS module. If using with the M210 RTK V2, you will only need to purchase the upward gimbal connector.
3. When connecting an upward gimbal, always make sure all the cables are properly secured so that they won't be in the way of the propellers. It is recommended that you detach the upward gimbal connector and store it elsewhere when not using an upward gimbal.
4.The upward gimbal connector for M200 Series V2 is different from the one for M200 Series.
- Aircraft
- 1.How are the M200 Series and M200 Series V2 drones different visually?
The M200 Series V2 drones have new anti-collision beacons on the aircraft shell and at the bottom of the battery compartment. The V2 arm lights are equipped with optical lenses, and the engraving on the body of the drone shows V2.
- 2.Can I switch the dual downward gimbal connector on the M210 V2/M210 RTK V2 to a single downward gimbal connector?
No.
- 3.What is the hovering precision of the M200 Series V2?
M200 V2/M210 V2 in P-mode with GPS: vertical: ±0.5m (±0.1m when Downward Vision System enabled). Horizontal: ±1.5m (±0.1m when Downward Vision System enabled).
M210 RTK V2 with RTK enabled on: vertical ±0.1m, horizontal ±0.1m.
- 4.What is the ingress protection level of the Matrice 200 Series V2 drones?
IP43. This means the M200 Series V2 drones can be operated in light rain (less than 10 mm/day). When flying in the rain, please:
1. Note that the IP rating does not protect against the situation where the angle between the horizontal plane of the drone and the rain fall is less than 60°.
2. Do not use S-mode.
3. Make sure the back cover to the expansion ports is securely closed during the flight.
4. Use weather-resistant payloads.
- 5.Does my purchase of an M200 Series V2 drone come with a Micro SD card?
Yes. A 64GB Micro SD card is included.
- Application
- 1.What do I need to fully utilize the RTK functions of the M210 RTK V2?
The performance and accuracy of the RTK functions can be enhanced with real-time differential correction using the DJI D-RTK2 High Precision GNSS Mobile Station For Matrice Series, which can be purchased as a combo through your DJI authorized dealer.
- 2.What is the ingress protection rating of the DJI D-RTK2 High Precision GNSS Mobile Station For Matrice Series?
IP65-rated.
- 3.Which SDKs are supported by the M200 Series V2?
M210 V2/M210 RTK V2 supports the OSDK, PSDK and MSDK.
M200 V2 supports PSDK and MSDK.
- 4.How do I get technical support for SDKs?
- 5.Can the External GPS Module for the M200 Series V2 be used for the M200 Series?
No.
- Surveying Solution
- 1.What payloads and software are required to use M210 RTK V2 for surveying and mapping?
You will need to use the M210 RTK V2 with Zenmuse X7 (either the 24 mm or 35 mm lens) and DJI Pilot.
- 2.How do I get started with the M210 RTK V2 with Zenmuse X7 for aerial mapping?
Please contact the local official DJI Dealer for information on documentation and support.
- 3.What positioning accuracy can M210 RTK V2 with Zenmuse X7 achieve?
At a GSD of 2 cm, the orthoimages produced can achieve an absolute horizontal accuracy of less than 5 cm using DJI Terra as the mapping software. This accuracy meets the requirements of 1:500 scale aerial maps.
- 4.Does the M210 RTK V2 + Zenmuse X7 support PPK?
Yes. The drone stores RTK RAW data and time data during the flight mission that can be used for post processing with PPK software to achieve high-precision positioning data when the RTK signal is weak.
- 5.How do I plan flight missions?
Use Mapping mode and Oblique mode in DJI Pilot. In Mapping, 2D orthographic flight paths can be generated after you set the required flight area. In Oblique, five flight paths will be automatically generated after you set the required flight area.
- 6.Can I resume a mission from a breakpoint?
Yes. You can do so in DJI Pilot.
- 7.Does DJI Pilot support storing photos in different file folders?
Yes. The photos shot in Mapping and Oblique modes will be stored in the subfolders under “survey” in the microSD card.
- 8.What microSD cards should I use?
The M210 RTK V2 comes with a 64 GB microSD card (comes in the package inserted onto the aircraft) and supports microSD cards of up to 128GB. The microSD cards below are recommended:
Lexar 633X UHS-I microSDXC 64GB (Model: LSDM164GBBAP633A)
Samsung PRO Endurance UHS-I microSDXC 64GB (Model: MB-MJ64G)
- 9.Where are the photos written?
The optic center of the lens in the Zenmuse X7 camera.
- 10.What formats of differential data does the M210 RTK V2 support?
The M210 RTK V2 supports RTCM3.0, RTCM3.1, and MSM3, MSM4, MSM5, MSM6, and MSM7 data under RTCM3.2.
- 11.What coordinate system does this solution use?
The coordinate system of M210 RTK V2 depends on where the RTK base station is set when you use RTK services or conduct the PPK workflow:
RTK Base Station: WGS84;
Network RTK: WGS84/CGCS2000;
Custom Network RTK: depends on the coordinate system of your custom network RTK.
- 12.How do I know at what height I need to fly my drone based on my GSD requirements?
In Mapping and Oblique modes in DJI Pilot, select the camera (Zenmuse X7 35 mm/Zenmuse X7 24 mm), then the app will automatically calculate the GSD according to your flight height. For example, if the flight height is 100 m, the GSD is 1.63cm/pixel for Zenmuse X7 24 mm and 1.12cm/pixel for Zenmuse X7 35mm. Based on this GSD value, you can adjust the height input and determine the height of your flight mission.
- 13.Will the images contain altitude information?
The images taken by the M210 RTK V2 will record the absolute altitude (ellipsoidal height) and relative altitude (relative to your takeoff point). Absolute altitude will be used for reconstructions, and relative altitude can be found in the XMP file.
- 14.Can the images be used for reconstruction using a third-party software? How precise is the reconstruction?
Yes. The precision of the reconstruction depends on the algorithm and settings of the third-party software. Please refer to the User Manual for third-party software operations.
- 15.Does the M210 RTK V2 support third-party base stations?
No, you cannot connect third-party base stations to the M210 RTK V2 or the remote controller via radio. However, you can obtain data from a network RTK server via NTRIP protocol in a 4G/Wi-Fi network environment. Satellite observation data stored in the aircraft can be used for post processed kinematics (PPK).
- 16.Is this solution compatible with DJI Terra?
You can import the photos captured by the M210 RTK V2 to DJI Terra for 2D and 3D Reconstruction (DJI Terra has been optimized specially for Zenmuse X7). However, you cannot use the Mission Planning or Real-time Mapping features in Terra. Please use DJI Pilot for flight planning.
- 17.Can I use the M210 RTK V2 with third-party payloads for mapping operations?
Yes. The M210 RTK V2 supports third-party payloads developed based via DJI SkyPort using DJI Payload SDK. Precision levels will vary depending on the payload.
- Software
- 1.What apps and software are supported by the M200 Series V2?
Currently supports DJI Pilot for Android and GS Pro.
Leo – DFH Software Engineer
November Sale: We’re adding these 5 items worth
$57.1
Frequently Bought Together
