DJI M600P “heavy lifter” drone available for hire
• Unique lifting power. 1-min video lifting an 11 kg payload*
• Custom payload carry and release device included (release button is on RC).
• Unique level of redundancy (6 arms/rotor pairs) and A3 Pro triple redundancy
• Long legs and large space underneath / ground clearance for carrying large volume payloads
The Matrice 600 Pro has always been the trusted workhorse of the aussie skies. Originally designed for carrying very large and expensive cinematography cameras it is still widely respected and used by industry experts for its lifting power, dependability and redundancy. The M600P has 6 rotors so if you get a motor failure you can still come down safely. Those extra 2 rotors on this hexacopter (compared to a quadcopter like the M300/M350) might just help you sleep at night, especially if you have an expensive payload/sensor onboard.
DJI M600P “heavy lifter” drone available for hire
The Matrice 600 Pro has always been the trusted workhorse of the aussie skies. Originally designed for carrying very large and expensive cinematography cameras it is still widely respected and used by industry experts for its lifting power, dependability and redundancy. The M600P has 6 rotors so if you get a motor failure you can still come down safely. Those extra 2 rotors on this hexacopter (compared to a quadcopter like the M300/M350) might just help you sleep at night, especially if you have an expensive payload/sensor onboard.
Very good for
Notable features
A3 Pro Flight Controller. This gives the industrial hexacopter triple redundancy.
Compatible with D-RTK GNSS to help reduce the impact of magnetic interference and give the pilot centimeter-level accuracy.
Comes in a fully built state, meaning the heavy lift UAV can be in the air in a matter of minutes.
9.5 kg (with six TB47S batteries onboard). 15.5 kg MTOW max take off weight (6kg recommended max payload weight)
32 min flight time with six TB47S batteries: No payload, or 16 mins with a 6 kg payload (assumes fresh batteries and minimal wind).
Originally designed to carry these gimbals and payloads but can carry many others: Ronin-MX; ZENMUSE Z30, Zenmuse X5/X5R, Zenmuse X3, Zenmuse XT; Zenmuse Z15 Series HD Gimbal: Z15-A7, Z15-BMPCC, Z15-5D III, Z15-GH4
*this example exceeds the official 6kg MTOW for the M600P which is also the DFH payload limit for hirees for this aircraft.
Contact the DFH Head office on [email protected] or 1300 029 829 for more information, availability, and pick up / drop off arrangements.
Diagonal Wheelbase | 1133 mm |
---|---|
Dimensions | 1668 mm × 1518 mm × 727 mm with propellers, frame arms and GPS mount unfolded (including landing gear) 437 mm × 402 mm × 553 mm with propellers, frame arms and GPS mount folded (excluding landing gear) |
Package Dimensions | 525 mm × 480 mm × 640 mm |
Weight (with six TB47S batteries) | 9.5 kg |
Weight (with six TB48S batteries) | 10 kg |
Max Takeoff Weight Recommended | 15.5 kg |
Hovering Accuracy (P-GPS) | Vertical: ±0.5 m, Horizontal: ±1.5 m |
Max Angular Velocity | Pitch: 300°/s, Yaw: 150°/s |
Max Pitch Angle | 25° |
Max Wind Resistance | 8 m/s |
Max Ascent Speed | 5 m/s |
Max Descent Speed | 3 m/s |
Max Service Ceiling Above Sea Level |
|
Max Speed | 40 mph / 65 kph (no wind) |
Hovering Time* (with six TB47S batteries) | No payload: 32 min, 6 kg payload: 16 min |
Hovering Time* (with six TB48S batteries) | No payload: 38 min, 5.5 kg payload: 18 min |
Supported DJI Gimbals | Ronin-MX; Zenmuse Z30, Zenmuse X5/X5R, Zenmuse X3, Zenmuse XT; Zenmuse Z15 Series HD Gimbal: Z15-A7, Z15-BMPCC, Z15-5D III, Z15-GH4 |
Flight Control System | A3 Pro |
Propulsion System |
|
Retractable Landing Gear | Standard |
Operating Temperature | 14° Fto 104° F (-10° C to 40° C) |
Voltage Output | 26.1 V |
---|---|
Rated Power | 600 W |
Single Battery Port Output Power | 100 W |
Capacity | 5700 mAh |
---|---|
Voltage | 22.8 V |
Battery Type | LiPo 6S |
Energy | 129.96 Wh |
Net Weight | 680 g |
Operating Temperature | 14°F to 104° F (-10°C to 40° C) |
Max Charging Power | 180 W |
Operating Frequency | 920.6 MHz to 928 MHz (Japan); 5.725 GHz to 5.825 GHz; 2.400 GHz to 2.483 GHz |
---|---|
Max Transmission Distance | FCC Compliant: 3.1 mi (5 km), CE Compliant: 2.2 mi (3.5 km) (Unobstructed, free of interference) |
Transmitter Power (EIRP) | 10 dBm @ 900M, 13 dBm @ 5.8G, 20 dBm @ 2.4G |
Video Output Port | HDMI, SDI, USB |
Operating Temperature | 14°F to 104° F (-10° to 40° C) |
Battery | 6000 mAh LiPo 2S |
Capacity | 4500 mAh |
---|---|
Voltage | 22.2 V |
Battery Type | LiPo 6S |
Energy | 99.9 Wh |
Net Weight | 595 g |
Operating Temperature | 14° F to 104° F (-10°C to 40° C) |
Max Charging Power | 180 W |
Model | M600 | M600 PRO | |
AIRCRAFT | Weight (no-load operation with six TB47S batteries) | 9.1Kg | 9.5Kg |
Weight (no-load operation with six TB48S batteries) | 9613g | 9960g | |
Max Take-off Weight | 15.1kg | 15.5kg | |
Flight Controller | A3 | A3 PRO | |
Dampening system | none | Dampening balls at the bottom of IMU units and A3 main controller | |
Max Flight Time (no-load operation with six TB47S batteries) | 35mins | 32mins | |
Max Flight Time (no-load operation with six TB48S batteries) | 40mins | 38mins | |
Flight Time (with load of 6Kg and six TB47S batteries) | 16mins | 16mins | |
Flight Time (with load of 5.5Kg and six TB48S batteries) | 18mins | 18mins | |
Propeller Model | DJI 2170 | DJI 2170R | |
Transportation | Transportation Mode | Unpackaged | Packaged |
Transportation Dimensions (folded) | 640*582*623mm(Without box) | 520*480*640 mm(In box) | |
Charger | Model | Charging Hub(A14-100P1A) | M600 Pro charger with Charging Hub(MC6S600) |
Voltage | 26.1V | 26.1V | |
Rated Power | 100W | 600W |